Floor Primer

Surface Prime SF is our clear, low viscosity, solvent free, epoxy floor primer. It is used to seal and prime concrete and other substrates prior to the application of liquid resin systems. Surface Prime SF is absorbed into the substrate sealing off surface defects which may cause ‘bubbling’ on the final surface finish. It is compatible with and adheres well to an extensive range of epoxy resin and polyurethane resin flooring systems.

Suitability

Surface Prime SF is used as a primer with our following Surface Resin flooring systems:

Surface Prime SF may also be used to seal and reinforce porous concrete prior to the application of other resin based flooring products. This product adheres to concrete, metal, wood and most flooring compositions.

Application

Apply by brush or roller, working the resin well into the surface. Apply further resin on porous surfaces until the surface is completely wetted out. Then push / spread the resin out as thinly as possible, leaving just enough resin on the surface to give a wet appearance. Allow the primer to cure hard before applying the appropriate resin system but do not allow longer than 48 hours between applications.

Datasheet

A PDF datasheet  is available by clicking here

NEED MORE INFORMATION?

Our staff have over 60 years of combined experience in floor preparation and surfacing so please contact us for full up-to-date advice regarding the best way to solve your flooring problems. Call us on 0161 728 3131, email us at info@surfacesolutions.co.uk or use our online enquiry form and we will be in touch with a solution to your flooring issues.

CONTACT US

23 Sutherland Street
Manchester
M27 6AT

WE ARE CHAS ACCREDITED

We appreciate the importance of membership and registration with recognised and respected organisations within the construction industry. CHAS (Contractors Health & Safety Scheme is one such organisation and we are proud to be registered as an accredited company – our details are available at www.chas.gov.uk

We are also registered with the CITB (Construction Industry Training Board) and all our site staff are qualified under the CSCS (Construction Skills Certification Scheme).