Floor Coating

Surface Coat WD is our water miscible, 2 part water dispersed epoxy resin floor seal. It has good adhesion to a wide variety of substrates to produce a tough, hard wearing floor finish and is available in a range of 12 standard colours or as a clear seal. Surface Coat WD unfortunately is not available in white.


Surface Coat WD can be used as decorative or clear dustproof seal on industrial floors in food preparation areas, warehouses, breweries etc. It does not contain solvents and is therefore more acceptable for use in areas prone to tainting. It adheres well to concrete, grano and asphalt. A single coat may also be applied directly to ‘green’ concrete to provide early protection from other trades or as a curing membrane to control water loss.


On porous concrete it is recommended that a coat of clear Surface Coat WD is applied to provide a primer prior to the application of subsequent coloured coats. It should be applied by brush, roller or spray and we would recommend the use of a paint tray for best results.


A PDF datasheet is available by clicking here.


Our staff have over 60 years of combined experience in floor preparation and surfacing so please contact us for full up-to-date advice regarding the best way to solve your flooring problems. Call us on 0161 728 3131, email us at info@surfacesolutions.co.uk or use our online enquiry form and we will be in touch with a solution to your flooring issues.


23 Sutherland Street
M27 6AT


We appreciate the importance of membership and registration with recognised and respected organisations within the construction industry. CHAS (Contractors Health & Safety Scheme is one such organisation and we are proud to be registered as an accredited company – our details are available at www.chas.gov.uk

We are also registered with the CITB (Construction Industry Training Board) and all our site staff are qualified under the CSCS (Construction Skills Certification Scheme).